Coronaviruses are a large group of viruses that can cause illnesses...
MORE INFOCoronaviruses are a large group of viruses that can cause illnesses ranging from the common cold to more severe diseases. This safety short examines the various ways in which Coronaviruses can be spread.
RUNNING TIME: 1 Minute
Coronaviruses are a large group of viruses that can cause illnesses...
MORE INFOCoronaviruses are a large group of viruses that can cause illnesses ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS).
As a family, coronaviruses are common across the globe. Recently, a new strain of coronavirus was discovered that has not previously been identified in humans. This new coronavirus, sometimes referred to as the novel coronavirus, leads to Coronavirus disease, also known as COVID-19.
This program covers:
The objective of this program is to increase awareness of Coronaviruses in general, and COVID-19 more specifically, and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.
Following procedures that have been laid down will go a long way to protect you from infection.
RUNNING TIME: 10 Minutes
As a family, coronaviruses are common across the globe. This safety short...
MORE INFOAs a family, coronaviruses are common across the globe. This safety short outlines some of the control measures that can be taken to prevent their spread.
RUNNING TIME: 2 Minutes
Face Masks are an effective control measure that can be used to control...
MORE INFOFace Masks are an effective control measure that can be used to control the spread of Coronaviruses. This safety short gives a quick overview of common mask types and how to use them correctly.
RUNNING TIME: 4 Minutes
Effective hand washing technique is crucial in helping avoid infectious...
MORE INFOEffective hand washing technique is crucial in helping avoid infectious diseases and maintaining good health. This safety short gives you a quick overview of how to thoroughly clean your hands.
RUNNING TIME: 1 Minute
Working from home is the practice of engaging in work without commuting to...
MORE INFOWorking from home is the practice of engaging in work without commuting to an established location such as an office, a facility, a complex or a campus.
There can be many benefits to both organisations and employees as a result of a remote work arrangement, such as reduced overheads for the organisation, less chance of spreading infectious illness and improved quality of life for the employee.
This program covers:
Just like working on-site a healthy and safe environment should be the goal for all people working from home. Regular, clear communication between management and staff is crucial to achieve this.
RUNNING TIME: 10 Minutes
Ergonomics is just one element that needs to be addressed in Workstation...
MORE INFOErgonomics is just one element that needs to be addressed in Workstation setup. This safety short outlines the important factors to consider when setting up a Workstation.
RUNNING TIME: 2 Minutes
Gas cylinders supply a wide variety of gases for a multitude of different...
MORE INFOGas cylinders supply a wide variety of gases for a multitude of different industrial, medical and domestic purposes. Most people instinctively appreciate that there are hazards associated with gas bottles and cylinders.
Included in this program:
Safety Data Sheets, safe work procedures and advice from the manufacturer and your supervisor should ensure the safety of all concerned with compressed gas cylinders.
RUNNING TIME: 15 Minutes
Gas cylinders supply a wide variety of gases for a multitude of different...
MORE INFOGas cylinders supply a wide variety of gases for a multitude of different industrial, medical and domestic purposes. This safety short gives you some general guidelines to apply when handling gas cylinders.
RUNNING TIME: 2 Minutes
Gas cylinders supply a wide variety of gases for a multitude of different...
MORE INFOGas cylinders supply a wide variety of gases for a multitude of different industrial, medical and domestic purposes. This safety short gives you some checks to perform before using gas cylinders.
RUNNING TIME: 1 Minute
The principles which govern Arc Welding can be applied for two other...
MORE INFOThe principles which govern Arc Welding can be applied for two other purposes, Arc Gouging and Arc Cutting.
There are a number of gouging and cutting processes but they all make use of the tremendous heat generated by the electric arc.
This program discusses the types of Arc Gouging and Cutting processes available and the safe and correct procedures to be applied.
Included in this program:
The objective of this program is to highlight the importance of operating Arc Gouging and Cutting equipment safely as well as to demonstrate the correct and safe way to perform some of the most common cuts.
DURATION: 13 Minutes
Metal Inert Gas Welding or MIG Welding is based on the electric arc welding...
MORE INFOMetal Inert Gas Welding or MIG Welding is based on the electric arc welding process, where completion of an electric circuit between positive and negative poles creates an electric arc, which generates tremendous heat permitting the fusion welding of metals.
Because of its versatility and the ability to weld in a variety of positions, MIG Welding has become the most popular welding process used in industry today.
This program looks at all aspects of MIG Welding and includes:
The objective of this program is to highlight the importance of operating MIG Welding equipment safely as well as to demonstrate the correct and safe way to perform some of the most common welds.
RUNNING TIME: 21 Minutes
Oxy-Acetylene Welding is one of the most common forms of welding in use...
MORE INFOOxy-Acetylene Welding is one of the most common forms of welding in use throughout industry. With the addition of a Cutting Torch the Oxy-acetylene Welding Unit becomes an efficient tool for the cutting of metals.
This program shows the correct and safe use of Oxy-acetylene Cutting Equipment, and includes:
The objective of this program is to highlight the importance of operating Oxy-Acetylene equipment safely as well as to demonstrate the correct and safe way to perform some of the most common cuts.
RUNNING TIME: 15 Minutes
Oxy-acetylene Welding is one of the most common forms of welding in use...
MORE INFOOxy-acetylene Welding is one of the most common forms of welding in use throughout industry.
This program shows operators how to use Oxy-acetylene equipment safely and correctly.
The program includes:
The objective of this program is to highlight the importance of operating Oxy-acetylene equipment safely as well as to demonstrate the correct and safe way to perform some of the most common welds.
RUNNING TIME: 25 Minutes
The TIG Welding Process produces extremely high temperatures which permits...
MORE INFOThe TIG Welding Process produces extremely high temperatures which permits pinpoint control of heat over a small heat affected zone. TIG welding is widely used when fine, high quality welding is required, particularly when welding metals such as aluminium and stainless steel.
This program covers a wide range of aspects relating to TIG welding and includes:
The types of welding current available for TIG welding:
TIG welding examples:
The objective of this program is to highlight the importance of operating TIG Welding equipment safely as well as to demonstrate the correct and safe way to perform some of the most common welds.
RUNNING TIME: 18 Minutes
Both oxy-acetylene and electric arc welding can pose safety and health...
MORE INFOBoth oxy-acetylene and electric arc welding can pose safety and health hazards for welders and workers nearby. Exposure to these hazards can result in discomfort, temporary or permanent physical injury, or even death.
‘Understanding Welding Hazards’ includes:
1. Identifying Welding Hazards
2. Evaluating Hazards in the Workplace
3. Workshop Controls
4. Work Practice Controls
5. Personal Protective Equipment
The objective of this program is to highlight the importance of operating welding equipment safely and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.
RUNNING TIME: 21 Minutes
Electric Arc Welding is a vital industrial process which makes it possible...
MORE INFOElectric Arc Welding is a vital industrial process which makes it possible for us to fuse two separate pieces of metal together into one solid mass. The principle is the same as when you take the exposed wires from the positive and negative terminals of a fully charged battery and touch them together, and we all know what happens then: A Spark.
In Arc Welding, this ‘spark’ between oppositely charged poles is maintained, and becomes an ‘electric arc’ which generates tremendous heat: Up to 6,000°C at the point of contact between the poles.
This raises the temperature of the metals to the point at which welding can occur.
The program shows correct and safe techniques as well as equipment knowledge and includes:
Striking the Arc
Correct procedures for a variety of Welds including:
The objective of this program is to highlight the importance of operating Arc Welding equipment safely as well as to demonstrate the correct and safe way to perform some of the most common welds.
DURATION: 23 Minutes